Professional Technical Stone Crusher Machine Parts Solid Friction Flang Bushing
We can supply most of the crusher accessories, such as: main frame assembly, main shaft assembly, adjustment ring assembly, horizontal shaft assembly, wear-resistant shield eccentric bushing, main frame bushing, protection bushing, bushing, various seal rings, wedge-shaped, we have OEM workers with the same original parts.
The transmission shaft bush (eccentric bush) of crusher is mainly used for the transmission shaft of spring cone crusher and Simmons cone crusher, and is the main part of the crusher.
Performance of horizontal sleeve of copper casting crusher:
High hardness, excellent wear resistance, not easy to produce the phenomenon of seizing, good casting performance and cutting performance, good corrosion resistance in the atmosphere and fresh water.
Wear resistant parts for working under high load and high sliding speed
Corrosion resistance, especially for dilute sulfuric acid, hydrochloric acid and fatty acid.
Product function
The function of the shaft sleeve in the machine is to reduce friction, vibration, corrosion, noise, maintenance and simplify the structure manufacturing process. In the moving parts, the long-term friction will cause the parts to wear. At this time, the copper shaft sleeve can reduce the friction. If the copper sleeve is worn to a certain extent, only the copper sleeve needs to be replaced, so as to save the cost of replacing the shaft or seat.
There is almost no metal consumption in the gating system and riser system, so the production rate is improved;
② The hollow casting can be produced without core, so the ability of metal filling can be greatly improved, the ratio of casting wall thickness to length or diameter can be reduced, and the production process of sleeve and tube castings can be simplified;
③ The casting has high density, few defects such as porosity and slag inclusion, and high mechanical properties;
④ It is easy to manufacture composite metal castings of cylinder and sleeve
Casting method
1. Pressure casting (mainly used for large quantities of precision products);
2. Lost wax casting (mainly used for small batch of handicrafts);
3. Low pressure copper casting (mainly used for small and medium batches of precision products);
4. Gravity casting of metal mold (mainly used for general parts of small and medium batches
Product Specification
| Company Type | Manufacture factory SGS Audit supplier |
| Material | Brass, Tin bronze, Lead bronze,Aluminum bronze,ect |
| Standard | ISO 2008,SGS,CE |
| Fearture | 1. High load capacity Cood anti-wearing 2. Low coefficients of friction
3.Good heat conductivity 4. High corrosion resistance
5.Long life and maintenance-free 6.No contaminant by oil or grease |
| Process | Centrifugal casting,sand casting,Machining,Injection |
| Quality assurance | 2D Projector, Height Gague,Micrometer,Roughness Tester,
CCD Autimatic Testing Machine CCD,Callipers |
| Tolerance | Roundness::+/- 0.01mm.
Flatness:+/- 0.005mm.
Height and length:+/- 0.01mm. |
| Drawing | Yes |
| Sample | Available |
| MOQ | 50KG |
| Lead time | According to required time |
Our Servoce :
Product Tags:
|
|
Professional Technical Stone Crusher Machine Parts Solid Friction Flang Bushing Images
|
